Improvement of a Centrifugal Compressor Test Bench to Incorporate Variable Impeller-Inducer Bleed Air System as an Active Surge Control
Copyright (c) 2024 Faltin Zsolt István , Beneda Károly Tamás
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Absztrakt
Centrifugal compressors are widely used throughout various industrial applications, including many safety-critical fields like aircraft engines. Thus, the enhancement of stable operational range is essential, which often requires active surge control methods. This includes state-of-the-art digital electronic measurement system to detect the onset of surge, which is a phenomenon that arises under extreme operational conditions and can lead to either negatively influenced behaviour or even the destruction of the compressor hardware in the case of uncontrolled conditions. Therefore, a strong emphasis must be given to observe impending surge and, if possible, to include an active system that can prevent undesired operational situations. Amongst many passive and active possibilities of surge control, Blade Load Distribution Control (BLDC) can be considered as a method, which creates acceptable influence on instabilities with a minor efficiency loss, consequently, could be applied as an active surge suppression system. The aim of this paper is to investigate feasible solutions on an existing centrifugal compressor test bench, which would enable to examine the theoretical solutions for blade load distribution control.
Kulcsszavak:
Hogyan kell idézni
Hivatkozások
S. Yan et al., ‘Surge Margin Monitoring of One Turboshaft Engine with Inlet Distortion’. Journal of Physics Conference Series, Vol. 2472, pp. 1742–6588, 2022. Online: https://doi.org/10.1088/1742-6596/2472/1/012053
B. Zhao et al., ‘Experimental Investigations on Effects of the Self-Circulation Casing Treatment on Acoustic and Surge Characteristics in a Centrifugal Compressor’. Aerospace Science and Technology, Vol. 131, Part A. 2022. Online: https://doi.org/10.1016/j.ast.2022.108002
H. Zhang et al., ‘Numerical Study of the Coherent Characteristics of the Blade Tip of a Micro Centrifugal Compressor and Its Application in a New Unsteady Casing-Treatment Experiment’. Physics of Fluids, Vol. 36, no. 1, 017139. 2024. Online: https://doi.org/10.1063/5.0190152
T. Haeckel et al., ‘Determination of a Numerical Surge Limit by Means of an Enhanced Greitzer Compressor Model’. International Journal of Turbomachinery Propulsion and Power, Vol. 8, no. 4, p. 2023. Online: https://doi.org/10.3390/ijtpp8040048
Q. Peng et al., Centrifugal Compressor Performance Prediction and Dynamic Simulation of Natural Gas Hydrogen Blended’. International Journal of Hydrogen Energy, Vol. 52, Part B, pp. 872–893, 2024. Online: https://doi.org/10.1016/j.ijhydene.2023.10.023
I. Shahin et al., ‘Large Eddy Simulation of Surge Inception and Active Surge Control in a High Speed Centrifugal Compressor with a Vaned Diffuser’. Applied Mathematical Modelling, Vol. 40, no. 23–24, pp. 10404–10418, 2016. Online: https://doi.org/10.1016/j.apm.2016.07.030
X. Zheng et al., ‘Experimental Investigation of Surge and Stall in a Turbocharger Centrifugal Compressor with a Vaned Diffuser’. Experimental Thermal and Fluid Science, Vol. 82, pp. 493–506, 2017. Online: https://doi.org/10.1016/j.expthermflusci.2016.11.036
T. Alsuwian et al., ‘A Review of Anti-Surge Control Systems of Compressors and Advanced Fault-Tolerant Control Techniques for Integration Perspective’. Heliyon, Vol. 9, e19557, 2023. Online: https://doi.org/10.1016/j.heliyon.2023.e19557
A. Renz et al., ‘Improving a Centrifugal Compressor's Performance at Low Mass Flow Rates by Adding an Acoustic Resonator’. Journal of Engineering for Gas Turbines and Power, Vol. 145, no. 12, 2023. Online: https://doi.org/10.1115/1.4063583
C. Jia et al., ‘Low-Frequency Fluctuation Propagation of Rotating Stall in the Centrifugal Compressor and Pipe System’. Physics of Fluids, Vol. 35, 124114, 2023. Online: https://doi.org/10.1063/5.0174314
C. B. Abed et al., ‘A novel experimental control method to suppress instability in a centrifugal compressor with two counter and co-rotating rotors’. Proceedings of the Institution of Mechanical Engineers Part A – Journal of Power and Energy, Vol. 237, no. 8, pp. 1715–1725, 2023. Online: https://doi.org/10.1177/09576509231181547
D. Altafi et al., ‘Entropy Generation Rate Analysis of Turbocharger Radial Flow Compressor in Range from Surge to Choke’. Proceedings of the Institution of Mechanical Engineers Part A – Journal of Power and Energy, Vol. 238, no. 3, pp. 401–426, 2023. Online: https://doi.org/10.1177/09576509231216187
Y. Jeong et al., ‘Supercritical CO2 Compressor Operation near Stall and Surge Conditions’. Case Studies in Thermal Engineering, Vol. 50, 103499, 2023. Online: https://doi.org/10.1016/j.csite.2023.103499
J. Li et al., ‘Surge Process of a High-Speed Axial-Centrifugal Compressor’. Processes, Vol. 11, no. 10, 2869, 2023. Online: https://doi.org/10.3390/pr11102869
M. Zhang et al., ‘Numerical Model of Predicting Surge Boundaries in High-Speed Centrifugal Compressors’. Aerospace Science and Technology, Vol. 141, 108518, 2023. Online: https://doi.org/10.1016/j.ast.2023.108518
Y. Hayashi, T. Cao, ‘An Investigation of Non-Linear Surge Characteristic in a High-Speed Centrifugal Compressor’. Journal of Turbomachinery, Vol. 145, no. 5, 2023. Online: https://doi.org/10.1115/1.4056089
P. Silvestri et al., ‘Compressor Surge Precursors for a Turbocharger Coupled to a Pressure Vessel’. Journal of Engineering for Gas Turbines and Power, Vol. 144, no. 11, 111014, 2022. Online: https://doi.org/10.1115/1.4055479
H. Chen et al., ‘Real-Time Instability Detection of Centrifugal Compressors Based on Motor Speed Measurements’. Journal of Thermal Science, Vol. 32, pp. 310–329, 2023. Online: https://doi.org/10.1007/s11630-022-1685-7
K. Beneda, Development of Active Surge Control Devices for Centrifugal Compressors. PhD Thesis, 2013.
H. Tamaki, ‘Effect of Recirculation Device with Counter Swirl Vane on Performance of High Pressure Ratio Centrifugal Compressor’. Journal of Turbomachinery, Vol. 134, no. 5, 051036, 2012. Online: https://doi.org/10.1115/1.4004820
S. Y. Yoon et al., ‘Model Validation for an Active Magnetic Bearing Based Compressor Surge Control Test Rig’. Journal of Vibration and Acoustics, Vol. 132, no. 6, 061005, 2010. Online: https://doi.org/10.1115/1.4001845
K. Beneda, Preliminary Results of Active Centrifugal Compressor Surge Control Using Variable Inducer Shroud Bleed’. Periodica Polytechnica Transportation Engineering, Vol. 39, no. 2, pp. 49–54, 2011. Online: https://doi.org/10.3311/pp.tr.2011-2.01
Zs. Faltin, K. Beneda, ‘Stress Assessment of Centrifugal Compressor with Surge Suppression Holes in the Impeller Hub’. in 2019 New Trends in Aviation Development (NTAD), pp. 40–44, 2019. Online: https://doi.org/10.1109/NTAD.2019.8875526